| SPECIFICATIONS | |
| Density | 6.5 -7.0 lbs./Gal. |
| Fire | Non-Flammable |
| Flash Point | None° F (as tested) |
| Lubricant (ASTM ISO) | 68cST 40°C |
| Pour/Cold Test | 0° / -80°F |
| Formulation | Bio-Degradable |
| Toxicity / Ozone | Very Low / Safe |
| Viscosity | 8.2 cps |
| Water Solubility | None |
DIRECTIONS FOR
USAGE
Saturate a cleaning patch of the correct caliber
for your firearm. Run it through the barrel or
barrels, cylinder and breech. A semi-hard
nylon bristle brush may be used to loosen any
heavy deposits. Repeat this process until a clean patch
emerges. For exterior maintenance, saturate a
cleaning patch and wipe the entire surface,
including the stock. Be sure to reach any
moving parts. For extremely difficult deposits, or
after storage, just submerge the firearm or parts
in PROLIX®. Use only plastic containers designed for this
purpose. Let the firearm soak as necessary, no
longer. After removal, repeat the cleaning
procedure as previously described. To insure
against any rust or corrosion, before storage,
wipe the firearm's surfaces, with a heavily
saturated cleaning patch. Your firearm may now
be stored in complete confidence. For corroded
or older firearms with spotting, carefully clean
the affected area, using a fine Scotch-Brite pad.
PROLIX® will not remove pits or metal defects!